Java·Applied·Geodesy·3D

Graphic missing in report (reply)

Micha — Mon, 22 Jun 2026 19:02:43 +0000

Hello Martin,

Second, I've come to a small bug. After you adjust network and you generate a report the plot of the adjusted network is not present if you did not click on "graphic" tab under project menu.

Yes, you’re right. I’ve made a correction and published a new version. Please check JAG3Dv20260622

Cheers
Micha

Graphic missing in report

Martin K — Mon, 22 Jun 2026 13:15:38 +0000

Hello.

First, let me thank you for such a wonderful tool JAG3D is.

Second, I've come to a small bug. After you adjust network and you generate a report the plot of the adjusted network is not present if you did not click on "graphic" tab under project menu. Once you click on "graphic" tab and then you generate report then the plot is shown in the report.

All the best.

Martin

Network adjustment workflow (reply)

zxy55 — Fri, 29 May 2026 04:31:17 +0000

Micha thank you very much for the example setup!

Network adjustment workflow (reply)

Micha — Sat, 23 May 2026 11:45:36 +0000

Hi,

define point A as datum point and point B as new point. Define an azimuth between both points to fix the orientation, and add the distance. A minimal example looks like zxy55.zip.

/Micha

Network adjustment workflow (reply)

zxy55 — Fri, 22 May 2026 21:36:29 +0000

Hello Micah,
Thank you for your reply.
Sorry, I have made a typing mistake. I meant to write horizontal directions.

I'm asking for this situation. If I set my A coordinates to be (0,0), how do i define azimuth/ bearing ( i chose 90-00-00 deg for image example because it's easier to explain) so it pulls distance form horizontal distance measurments and automatically calculates the coordinates for point B. Or do i have to manually define as (50,0) ?

What I'm trying to do Is free network adjustment 2D (in some local system), but I don't know how to set it up. For free network do i define the point A as (0,0), B(50,0), rest of the points as new points?